Publicité
Les langues disponibles
Les langues disponibles
12. alarm clock
The radio has two individually adjustable alarm times.
12.1 Settings
Alarm 1 and Alarm 2 are configured identically and allow two separate alarm times to be saved.
Press [alaRM] (9) to open the Settings menu. Select Alarm 1 or 2 using the rotary controller (11).
Confirm your selection by pressing rotary controller (11).
Step 1
Turning the rotary controller (11) allows you to switch between "ON" (alarm active) and "OFF") (alarm
inactive). If you select "OFF", the setup process is terminated and you are taken back to the alarm menu's
start screen
Step 2
Turn the rotary controller to select the time in hours. Confirm the selection by pressing the rotary
controller (11). Next, repeat the setting process to configure the alarm time in minutes.
Step 3
Now select which days the alarm is to be active on. The following options are available for this:
a) Daily
à The alarm is active from Monday to Sunday
b) Once
à The alarm is only active once, i.e. as soon as the set alarm time next arrives.
c) Mon – Fri
à The alarm is active from Monday to Friday
d) Sat – Sun
à The alarm is active from Saturday to Sunday
e) Select days
à This selection takes you to a drop-down menu in which you can choose the
required day (Monday to Sunday). Once a day is selected, this is indicated by a
symbol (√)
Step 4
Now choose whether you wish to be woken by an alarm (Sound) or the radio (Radio). If you choose
Radio, you can select from Favourites 1 and 2 that are saved on the shortcut buttons.
Step 5
You can set the volume at which the alarm sound should be played. This setting makes it irrelevant how
loud you last listened to the radio.
Step 6
Now select the alarm duration.
note
The
[alaRM]
button (9) takes you back to the previous step.
The alarm setting process is now complete. As soon as the alarm goes off, you can activate the snooze
function by pressing the rotary controller button. Repeatedly pressing the rotary controller (11) allows you
to change the snooze time. [alaRM] (9) disables the alarm.
note
You can activate and deactivate alarm 1 again by pressing and holding
function also works if the radio is in standby mode.
If the alarm is active, the alarm symbol appears on the left next to the time. If the radio is switched off,
the alarm symbol is displayed on the left next to the date.
The symbol for alarm 2 appears on the right-hand side accordingly. Alarm 2 cannot be activated via a
shortcut button.
[alaRM]
13
alaRM CloCK
(9). This shortcut
naVIGaTe
enTeR
Publicité
