Bosch KTL15NWEA Instructions D'utilisation Et De Montage page 23

5. Unscrew the screw and remove the closing plate.
6. Rotate the closing plate through 180° and apply it
to the other side.
7. Apply the screw and tighten.
8. Insert the guide sleeve into the borehole.
9. Rotate the appliance door through 180° and at the
top insert the top pin into the guide sleeve.
10. Put the hinge onto the bottom pin of the freezer
compartment door.
11. Apply the screw and tighten.
Getting to know the appliance
Appliance
The features of the models may vary.
The illustrations may differ from your particular model.
A Freezer compartment
B Fridge compartment
1 Ice-cube tray
2 Light switch
3 Electronic temperature controller and LED light
4 Glass shelve
5 Cover for crisper drawer
6 Crisper drawer
7 Door pockets
8 Egg tray
9 Door pocket for bottles
Note
To achieve the best energy efficiency of this appliance,
please place all shelves and drawers in their original
position as shown in the illustration above.
Switching on the appliance
Plug the mains plug into the mains outlet socket.
The appliance will start cooling.
The light comes on when the appliance door is opened.
Notes on using the appliance
After switching on the appliance, it may be several
■
hours before the set temperature is reached.
Do not put any food in the appliance before then.
en
23