CUTRA CtrlAX Manuel D'instructions page 20

3types of modes
Press the power button of the main body to enter the standby mode.
You can check your current mode by the number of LEDs lit.
Eco Mode
This is the state which protection function is activated due to the high-temperature
Vibration heat in the circuit after continuous vibration mode.
1. Operation function is impaired
When heat is generated
If there are any problems with the components, please check the following
If the bladed fixture is dirty
-> clean the blade fixture and
The inner surface
Comport Mode
Standby mode after the beep sound
2. There will be one beep sound and
Will automatically switch to standby mode
Checklist
If the blade fixture is broken
-> replace it with a new one
Description of its state
3. The device can be used again
If the blade is dirty or broken
-> replace it with a new one
Sport Mode
When it cools down.