Publicité
Les langues disponibles
Les langues disponibles
21. Never blend bones, ice, coffe or peanuts.
22. When changing accessories, be sure that device is NOT connected to electricity.
23. Short-time operating: Use the appliance for no longer than 50 seconds and leave it
cooled down completely before using again about 4 minutes.
24. Before first use, clean the device.
25. When cleaning device, do not use aggresive detergent, it may damage the cover of the
device.
DESCRIPTION OF THE DEVICE (Figures 1 and 4)
1a Cup lid
1c Cup
1e Engine unit
USING THE DEVICE
1. Ensure that all blender elements are clean.
2. Place the ingredients in the cup (1c). Do not exceed 600ml (Fig 2).
3. Attach the blender cutting blades (1d) to the blade cup (1c) by screwing them onto the cup
(Figure 3).
4. Place the cup (1c) with the attached cutting blades (1d) on the engine unit (1e). Please note the
position of the switch indicator (4f).
5. Connect the power cord to a power socket.
6. To start the blender, turn the cup (1c) to the right and turn on the button. Do not use the blender
for longer than 2 minutes. T
7. Remove the power cord from the power socket.
6. Remove the cup (1c) from the engine unit (1e).
CLEANING AND MAINTENANCE
Clean the blender cup and cutting blades using water with dishwashing liquid after every use.
The engine unit must not be cleaned under running water or immersed in water.
TECHNICAL DATA
Power: 500W
Power supply: 220-240V~ 50Hz
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT
DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1. Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
2. Das Gerät ausschließlich an die Steckdose 230 V - 50 Hz anschließen. Es darf nicht zu
1b Cup bottom
1d Blender cutting blades
4f Switch indicator
DEUTSCH
ALLGEMEINE SICHERHEITSVORSCHRIFTEN
4
Publicité
