The rinse aid empty notification
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the hot rinse
phase.
When the rinse aid chamber is empty, the
rinse aid indicator is turned on notifying to
refill rinse aid. If the drying results are
satisfactory while using multi-tablets only,
it is possible to deactivate the notification
for refilling rinse aid. However, for best
drying performance, always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
Make sure the appliance is in user mode.
1. Press the programme button
immediately.
The indicator
starts to flash.
2. Wait until the indicator
flash and the remaining programme
indicators are off.
The indicator
shows the current
setting:
•
is on = Rinse aid empty
notification is on.
•
is off = Rinse aid empty
notification is off.
3. Press the programme button to
change the setting.
4. Press the on/off button to confirm the
setting.
Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of the
programme
Make sure the appliance is in user mode.
1. Press the programme button twice.
The indicator
2. Wait until the indicator
The indicator
setting:
3. Press the programme button to
4. Press the on/off button to confirm the
AirDry
continues to
AirDry improves the drying results with
less energy consumption.
starts to flash.
to flash and the remaining programme
indicators are off.
shows the current
•
is off = The acoustic signal is
off.
•
is on = The acoustic signal is
on.
change the setting.
setting.
During the drying phase, the
door opens automatically and
remains ajar.
35
continues