iComfort ic7500 Manuel D'utilisation page 4

2) Pivot the leg's linkage pole support brackets over the linkage pole on both sides of the leg rest
(figure 3).
Use the provided 2 x M4 screws to secure the leg rest to the massage chair. Lift the leg rest up and
down to check if it is well secured. Make sure the connector and the air tube is not twisted. (figure
4)
3) Head and Backrest Cushions
The head cushion allows you to control the intensity of the neck and shoulder massage. You can
decide whether to use the head cushion (Recommend) or to remove it for a more intense massage.
The backrest cushion is zipped' on and the head cushion is attached with a Velcro®.