Nicols LED BAR 123 FC IP Manuel D'utilisation page 9

LED display for easier operation.
Selectable built-in programs, Auto running, DMX mode, M/S mode and colours
DMX modes: 7 / 36 channels
3. Working modes
Operate with three buttons. There are two kinds of function for the first button:
A/ press the "mode" above 2 seconds, until the LED display show enter next working mode,
then it is enter another kind of working mode. This operation can switch into 5 working
modes.
B/ press the "mode" button, then enter the son menu of the current working mode.
3.1 Built-in program mode
Press the "mode" button above 2 seconds, switch into 5 working modes, until it shows "P.xx
(01~35).It is the manual build-in programs.
Press the "UP" or "down" to choose the build-in programs effects (P.01~P.35).
Press "mode" button until it shows "S.xx" (01~99~FL) Press "up" or "down" can adjust the
build-in programs speed.
Press the "mode" button, show "F.xx" (00~99) Press the button "up" or "down" to adjust the
build-in programs strobe speed.
3.2 Auto running mode
Press the button "mode" above 2 seconds, switch into 5 working modes, until it shows
"AUT", then it is enter the auto running mode.
Press the "mode", show "S.xx" (01~99~FL). Then press the "up" or "down" to adjust the auto
running mode speed.
Press the "mode", show"F.xx" (00~99). Press "up" or "down" to adjust the auto running
strobe speed.
3.3 DMX mode
Press the "mode" above 2 seconds, switch into 5 working modes, when it shows "xxx"
(001~512). It is the DMX control mode. Press the "up" or "down" to set up the address of this
kind of products. Press the "mode" button, show "03c"or"07c"or"36c. Press the "up" or
"down" to choose the working mode; There are 3 channel,7channel,36 channel for your
choose.
8-