Microgard 3027 Guide Rapide

Difficulty Rating
Note de difficulté
Calificación de dificultad
Application: Application: Aplicación:
Lexus GS300, GS400, SC400
Installation Bulletin
Bulletin d'installation
Boletín de Instalación
Location of cabin filter:
Under the driver side dashboard on the side of the heater
unit by the accelerator pedal behind the cabin filter access
door.
Tools:
Unknown or not required.
To replace existing filter:
1. Pull the driver's side carpet (directly adjacent to the
accelerator pedal) to expose the heater unit and cabin filter
access door.
2. Locate the retaining tab on the top of cabin filter access
door. Squeeze and pull out on the door and remove.
3. Remove the dirty cabin filter by pulling outward.
Remove the second filter by pulling downward and then
outward.
4. Install two new filters and compete installation by reversing
the procedure.
3027
12-2011