Microgard 3753 Guide Rapide

Difficulty Rating
Note de difficulté
Calificación de dificultad
Application: Application: Aplicación:
Chevrolet Caprice, Pontiac G8
Location of cabin filter: Under the hood on the passenger side vehicle under the air inlet
grill panel.
Tools: Unknown or not required
To remove existing filter:
1. Open the hood.
2. Remove the wiper arms.
3. Remove the rear hood seal.
4. Remove the six retainers on the leading edge of the passenger side air inlet grill.
5. Pull upwards and inward on the passenger side air inlet grill to disengage the retainers
on the back edge and remove the panel.
6. Remove the dirty cabin filter by pushing downward and pulling out.
7. Install the new cabin filter.
8. Position the passenger side air inlet panel into position and secure it with the retainers.
9. Re-install the rear hood seal.
10. Install the wiper arms.
11. Close the hood.
Installation Bulletin
Bulletin d'installation
Boletín de Instalación
3753
03-2012