Altrad Belle PRO TROWEL 900 Manuel De L'opérateur page 17

Using The Trowel
Guiding the trowel on the slab is very simple. Get into operator's position behind the centre of handle with good footing and apply the
throttle slowly until desired speed is obtained.
Preparation Of Concrete Surface
Use of a mechanical or air vibrating screeding machine to strike the concrete surface to level will provide good compaction to the
screeded slab.
Floating Operation
After each operation the engine should be stopped.
CAUTION
Finishing Operation
when running the trowel on areas where water has been applied because the machine will tend to skate away. Be sure to maintain
control at all times.
Pitch Adjustment - Pro Trowel
undertaken whenever it is necessary.
Spider Plate
Machine Cleaning
Clean the machine after it has been used to prevent the collection of hardened cement.
Changing Blades
Be sure spark plug is disconnected before changing the blades.
CAUTION
Remove bolts and lock washers on each trowel arm and remove the blades.
behind trowel arm.
Install bolts and lock washers on each trowel arm and fasten them.
Liability
Altrad Belle.
the machine or nonobservance of the operating instructions contained in this manual.
Operating Instructions
Never lift the machine by the guard ring.
prevent the hands being cut.
17
GB
.