2 Safety
Expertise in material selection and instal-
l
lation.
2.3 Safety information
n
Read the instructions carefully and in full
and follow the warning notices.
n
Store the instructions securely.
n
The Wallbox must be installed, connected
and commissioned by a qualified electrical
engineer in compliance with local regu-
lations and standards.
n
Only semi-public and private locations are
permitted.
n
Observe the information regarding the
assembly and installation location, see
Assembly and installation location
n
Observe the ambient conditions (tem-
perature and humidity, see
n
Only approved parts are to be used. Instal-
lation of damaged / soiled / contaminated
parts is not permitted.
n
Do not stick anything onto the Wallbox or
block it with objects.
n
Do not insert any objects into the Wallbox.
n
Do not place any objects on the Wallbox.
n
Avoid the Wallbox coming into contact with
liquids.
n
Do not install in potentially explosive loca-
tions.
n
Protect each installed Wallbox with a resi-
dual current circuit breaker (minimum
RCD type A).
n
Observe the required overvoltage and fault
current protection (RCD type A), see
nical
data.
n
No not use extension leads, cable drums or
multiple socket outlets.
n
Do not use adapters.
n
For StecaGrid Charger ERK_22 version:
Protect the socket.
n
For StecaGrid Charger ERK_22 version:
Do not detach, manipulate or bypass the
manufacturer's seal.
n
Do not make any modifications to the hou-
sing or the internal components of the Wall-
box.
n
Observe the national safety regulations.
n
Observe all local regulations for electrical
installations, as well as current fire pre-
vention and accident prevention regulations.
.
Persons with a cardiac pacemaker must
n
maintain a distance of at least 60 cm and
Technical
data).
persons wearing a defibrillator a distance of
at least 40 cm from RFID scanners, iden-
tifiable by the symbol on the front panel.
Note
eSystems MTG GmbH only accepts responsibility
for the delivery condition of the Wallbox and for
work performed by the manufacturer's specialist
personnel.
Tech-
26