VinoStyle VS12CC Notice D'utilisation page 20

Temperature adjustment

Press the

Press the button
NOTE :

This product is designed for maximum cooling of 12.5°C below ambient temperature.

When the ambient temperature around 25°C, unit can maintain a temperature range between
12.5-18°C.
Light setting

Press the key
after 10 minutes.
When the surrounding temperature is 25℃ and the wine cooler has no bottle loaded, it will take
around 30 minutes to increase the wine cooler's temperature from 11℃ to 18℃. Under the same
circumstance, it will take around 60 minutes to decrease the wine cooler's temperature from 18℃
to 11℃. The less the temperature span is, the less time it will take.
Announced capacity
The announced capacity is the maximum capacity calculated with a defined number of shelves, which
varies according to the model. This standard is calculated with 75cl bottles of the traditional
Bordeaux type. Any other type of bottle size and the addition of shelves will considerably reduce the
storage capacity.
The capacity of your wine cellar is measured according to the EN62552 standard.
For the reference VS12CC, the maximum capacity has been calculated with 3 shelves.
For the reference VS18CC, the maximum capacity has been calculated with 5 shelves.
For the reference VS28CC, the maximum capacity has been calculated with 6 shelves.
6. CARE AND MAINTENANCE
Cleaning your thermoelectric cooler
Before cleaning your appliance (something that should be done regularly), disconnect it by removing
the plug or by pulling the fuse on the circuit.
Before using your appliance for the first time and regularly after that, we recommend that you clean
the inside and outside (front, sides and top) with warm water mixed with a gentle cleaning product.
Rinse with clean water and allow to dry before reconnecting. Do not use solvents or abrasives.
In the event of a pronounced plastic smell, clean the appliance with a mixture of two tablespoons of
bicarbonate of soda, mixed in a ¼ litre of lukewarm water.
When the appliance is switched on for the first time, there may be a residual odour. In that case, run
the appliance empty for a few hours at the coldest possible temperature. The cold will kill any odours.
or keys to increase or decrease the temperature by 1°C.
to change the temperature display mode to Fahrenheit or Celsius.
to turn on and off the interior light. Note, the light automatically turns off
19