Operation Modes; Start-Up And Operation - Soler&Palau EMIBLUE-4A Manuel D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. - Thermostat.
To select ambient temperature in Comfort mode.
4. - Mode key:
Selects the work function. This function will be indicated according to the
status of the associated LED.
5. - LED Mode:
Solid illumination:
Flashing illumination:
Off:

5. OPERATION MODES

- In Comfort Mode, the transmitter will keep the ambient temperature
constant for the time the area is occupied, according to the position selec-
ted on the thermostat control.
- In Economy Mode, the transmitter will automatically maintain an
ambient temperature 3.5 ºC below the temperature selected in the
Comfort mode.
- In Anti-freeze mode, the transmitter will not work unless the ambient
temperature falls below 7ºC, working only to avoid the temperature falling.
This mechanism is especially useful in places with low temperatures where
it is easy for water in the pipes, etc. to freeze

6. START-UP AND OPERATION

1.- Press the StandBy key until the LED associated to it changes to green
or amber.
2.- Press the MODE key until the LED associated to it shines a solid colour.
3.- Turn the thermostat control clockwise to its limit (the status LED should
be amber).
4.- Once the room has reached the desired temperature, turn the ther-
mostat control anticlockwise slowly, until the status LED is green. From
that moment, the device will switch on and off automatically, maintaining
the selected ambient temperature constant.
5.- To turn off the equipment, press the StandBy key (LED_status red led).
6.- Keyboard lock function. To avoid undesired manipulation, it is possible
to block access to the equipment so that it is not possible to modify any
adjustment by pushing either of the two keys or turning the thermostat
control. To do this, press the StandBy key (1), continuously for 10 seconds.
The keyboard locking will be confirmed by rapid flashing of the associated
LED (2). To unlock the device, just press the StandBy key (1) again for 10
seconds. The flashing LED will indicate that access has been unlocked.
Note: If there is any disturbance, the overheating disconnection system
Comfort mode
Economy mode
Anti-freeze mode
16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Emiblue-6aEmiblue-8aEmiblue-10aEmiblue-12a

Table des Matières