Publicité
Liens rapides
The compact fan-extractor with integrated wall mounting or wall solar panel. It must be installed where the sun directly
to the solar panel, to feed the engine directly.
It is ideal for homes, kitchens, bathrooms, conservatories, garages, etc.. or anywhere that requires renewal of air and
is independent of the mains.
- Standalone operation with sunlight.
- Not running costs.
- PUT & PLAY System.
- Royalty pollution.
- Prevent mold, condensation, moisture and odors.
- Fully automatic operation.
- To install on a wall or wall. Attaches with just 4 screws. Easy assembly
- Waterproof and weatherproof.
- The casing and screen and the gasket, are calculated to prevent the entry of rainwater.
- Monocrystalline solar cells and integrated high performance in the extractor.
- Internal rechargeable Ni-MH battery.
- When the batteries are fully charged, they allow operation for 24 hours, even at night.
- Engine start-stop switch.
- Overload protector.
- Renews 60 m³ of air every hour.
- In small installations installs as an extractor. In places where you need to vent a large surface, mounted one (or two)
as exhaust and one as a fan. Both functions are accomplished with the same apparatus.
- Includes games driving blades and a set of extractors blades to be used interchangeably depending on usage needs.
They can be easily exchanged, pressure mounted.
Compact solar extractor-fan
Compact solaire extracteur-ventilateur
Extractor-ventilador compacto
Extractor-ventilador compacte
www.fadisel.com
-
C-0706
TECHNICAL CHARACTERISTICS
Fan capacity : 60 cubic meters of air per hour
Tube diameter : >-110 mm
Solar Panel: Voc : 3.5 VDC
Frame Dimensions : 210 x 240 mm
Material : ABS plastic
Total weight : 0.75 kg
sat@fadisel.com
Publicité
Manuels Connexes pour Fadisel C-0706
Sommaire des Matières pour Fadisel C-0706
- Page 1 Compact solar extractor-fan Compact solaire extracteur-ventilateur Extractor-ventilador compacto Extractor-ventilador compacte C-0706 TECHNICAL CHARACTERISTICS Fan capacity : 60 cubic meters of air per hour Tube diameter : >-110 mm Solar Panel: Voc : 3.5 VDC Frame Dimensions : 210 x 240 mm Material : ABS plastic Total weight : 0.75 kg...
- Page 2 C-0706 Le fan-extracteur compact avec fixation murale intégrée ou un panneau solaire de mur. Il doit être installé là où le soleil directement au panneau solaire, pour alimenter directement le moteur. Il est idéal pour les maisons, les cuisines, salles de bains, vérandas, garages, etc. ou n'importe qui nécessite le renouvellement de l'air et est indépendante de la tension secteur.
- Page 3 C-0706 - Prevé la formació de floridura, condensació, humitat i males olors. - Funcionament totalment automàtic. - Per instal·lar en una paret o mur. Es fixa amb només 4 cargols. Fàcil muntatge. - Resistent a l'aigua i a la intempèrie.
- Page 4 C-0706 The outer surface of the wall where the extractor-fan support has to be clean and smooth for the gasket that lines the back of the extractor get a perfect fitting to the wall to prevent accidental entry of water during rain . When the adjustment is correct, place the extractor anivelado well and mark the four holes in the wall.
- Page 5 C-0706 The blades are mounted to pressure. If you need to replace the original game extractor blades (white) to expel air outside, play driving blades (gray) that inject air into, proceed as follows : Les lames sont montées à pression. Si vous avez besoin de remplacer les lames d'extraction de jeu original (blanc) pour expulser l'air extérieur, jouer lames route (gris) qui injectent de l'air dans, procédez comme suit :...
- Page 6 The engine will stop working as soon as the battery is discharged. The solar panel used in the manufacture of exhaust fans or ceiling fans-C-0706, consists of 4 cells forming a circle, and are connected in series to obtain an output of 2.1 V - 500 mA in full sun. The small engine needs 170 mA for operation at maximum speed.
- Page 7 El motor dejará de funcionar en cuanto la batería haya sido descargada. El panel solar usado en la fabricación de los ventiladors-extractores C-0706, está formado por 4 células que forman un círculo, y están conectadas en serie para obtener una salida de 2,1 V - 500 mA a pleno sol. El pequeño motor necesita unos 170 mA para su funcionamiento a máxima velocidad.