Publicité
Les langues disponibles
Les langues disponibles
Setting up the tent
1.
Open the roof of the star tent. Tip: Before you begin, lay down a groundsheet to prevent the tent from getting dirty whilst you
are setting it up.
2.
Take the protective pocket from around the horseshoe-shaped end of each leg (a) and slide the horseshoe-shaped end of
each leg over the corresponding peg (b).
3.
Mount the pole of the star tent by sliding the poles into each other in the correct sequence. This manual is based on a star
tent of 8.65 by 13.65 m. For this star tent you do not need one of the two identical tubes for the pole (tube 3 or 4). For all other
sizes, you need all of the tubes to assemble the pole.
1.
2b.
2a.
3.
1
2
3
4
EN
5
Publicité
