Télécharger Imprimer la page

Pelgrim GVW486ONY/P01 Mode D'emploi page 81

Publicité

Les langues disponibles

Les langues disponibles

OPERATION
Switching on
• Open the door to the dishwasher.
• Press the "on/off" button (1) to switch on the appliance.
The indicator will light up when the appliance is switched on.
• Select the desired cycle (see page 10 "cycle selection table").
Press the programming button (2) repeatedly to select the required
cycle. The indicator (9) corresponding to the selected cycle will light up.
• Close the door to the dishwasher. The dishwasher will automatically
start running the selected cycle.
Delayed start time
If you want the dishwasher to switch on at a later time, you can used
the "delayed start" button (5). You can choose to delay the start time by
1 to 24 hours. Each press of the button (5) changes the delay time. The
display (6) show the delayed start time that has been selected.
'Alt'-Funktion
Dieser Geschirrspüler verfügt über ein "2-Zonen"-Geschirrspülprogramm.
Wählen Sie mit der "Alt"-Taste (4) das Geschirrspülprogramm für den
oberen Korb (Abwasch im oberen Korb) oder für den unteren Korb
(Abwasch im unteren Korb). Sie sparen damit Wasser und Energie, und das
Geschirrspülprogramm wird verkürzt.
Selecting the "3-in-1" function
The dishwasher features a 3-in-1 function. If you select this function
(button 3), the dishwasher does not need to be filled with salt and rinse
agent, but rather you use so-called 3-in-1 dishwasher tablets in their
place. This function only applies to 3 cycles: Intensive/Normal/ECO.
Note: Only use 3-in-1 tablets in combination with the 3-in-1 wash
cycle. If you use 3-in-1 tablets with other cycles, this will deliver lower
performance in terms of the washing results.
EN 9

Publicité

loading

Ce manuel est également adapté pour:

Gvw486onyGvw486ony/p02