Publicité
Les langues disponibles
Les langues disponibles
x1
stroller frame
Pet carrier
Unfolding and install pet stroller
slot
slot
06
Parts
x1
x2
Front wheel
Rear wheel
1.Unfolding frame:
Hold the handlebar with both
hands and lift it up until a click
is heard which means the frame
is fully open.
2.Unfolding pet carrier:
Take out the pet carrier, press
the bottom plate with one hand,
and pull the belt on the iron
support with the other hand in
the direction of the arrow 45
degrees until the iron support
on both sides are completely
stuck into the slot.
x2
3.Installing pet carrier:
First put the front seat tube into
the front cloth cover of the
carrier as the direction of the
arrow, and fix the rear end of
the carrier on the back seat
tube with hook and loop
fasteners.
Use of wheels
1.Install & disassemble front
wheels :
Insert the front wheel set into
the front wheel seat, it is
installed when hear "Click".
Press the buckle on the front
wheel seat with your hand and
pull it down, then the front
wheel set is removed.
2.Install & disassemble rear
wheels:
Insert the rear wheel set into
the rear wheel seat, it is
installed when the barb on the
rear wheel seat pops out. Hold
the barb on the rear wheel seat
and pull it out, the rear wheel
set can be removed.
07
Publicité
