Publicité
Les langues disponibles
Les langues disponibles
requirements of the French electrical standards
NFC15-100.
• The device must be powered through a Residual
Current Device (RCD) having a rated differential
operating current not exceeding 30 mA.
• If being fitted in a bathroom, a 30mA RCD must
be used.
• With respect to the details of how to install the
appliance
"INSTALLATION".
• Regarding the detailed information on the
connection of the electric cable, refer to the
section "ELECTRICAL CONNECTION".
INSTALLATION
IMPORTANT RECOMMENDATIONS TO READ
BEFORE INSTALLATION
- Do not install the unit directly below a socket.
- Do not install the unit in a damp room or near
a water source.
- Do not use the appliance outdoors.
- Do not install the unit in an air current that
could disrupt its regulation.
- Do not place the unit near a barrier limiting the
airflow around it.
- Attach the heater vertically to the wall as
described below.
- Choose screws and plugs suitable for the wall
onto
the
4
wall,
refer
to
part
Publicité
