Energizer Solar Peak 1800 Mode D'emploi page 12

ENERGIZER SOLAR PEAK 1800
PV Charging
Solar panels can be used to charge the power station as shown in the above diagram
*Solar charging cable (DC7909)
• Please follow the Energizer Solar Sunpack user manual to connect the solar panels.
• Before connecting the solar panel, check whether its output voltage is within the power station specifications to
avoid damage to power station.
*The interface of this product is DC7909. If you need an adapter cable from MC4 to DC7909, please contact Energizer Solar
at www.energizersolar.com on how to purchase.
Car Charging
*Car charging cable (DC7909)
Power station can be charged by a car charging port. It should be charged after the car starts, so as to avoid the
car battery loss and failure to start. At the same time, ensure good connection between the car charging port and
cigarette lighter. We take no responsibilities for any loss caused by improper operation.
Charge the power station by solar panel.
12
Note: The 15A car charger fuse is inside.
Under abnormal circumstances, the fuse is
blown, please replace it by yourself.
ENGLISH