Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
IMPORTANT! Any installation operation shall be carried out by a suitably
trained staff, following carefully the information given in this manual.
Check the packaging at the reception of the goods and verify that the device
has not been damaged during transport or storage operations. Make sure you
receive all the com- ponents. Ask the manufacturer for any possible missing
component.
The hose reel has to be wall mounted at a minimum height of the floor of
2.50 m in order to prevent accidents during work operations. Considering
the hose reel weight and dimensions, its movement requires the use of lifter
devices. In particular cases it is possible to mount it on the floor or on
other machines as accessory, only if complete with a fixed support. The hose-
guide arms can be fixed in three different positions according to the hose reel
installation (see pictures A-B-C).
Mount the hose reel in fixed position or with revolving stand on stiff and
consistent walls using 4 dowels of 10 mm diameter.
WARNING! The manufacturer declines any responsibility for injuries to
people or damages to things caused by a wrong assembly of the hose
reel.
Before putting into operation:
• Check that the operating pressure is less than 4 bar.
• Check the presence and operation of the pressure regulator to avoid accidental hose bursts.
• Make sure that the operators are trained to use the reel.
14
Publicité
