Adventys KTi2 Serie Guide D'utilisation Et D'installation page 18

Mechtnictli inattlilittion for 360 x 690 vitrocertmic :
- 1 - Carry out the cut in the top respecting the drawing (366 +4/-0 x 696 +4/-0).
- 2 - Set the frame under your counter top.
- 3 - Insert the kit inside the cut and adjust the 4 screws in order to obtain the top of the furniture and the
top of the vitroceramic glass at the same level.
- 4 - Remove the kit.
- 5 - Deposit the thermal high-strength glue on the 4 supports.
- 6 - Insert second time the kit inside the cut with better centering.
- 7 - Press the kit until to touch the 4 screws.
- 8 - Clean the surplus of glue to have no overflowing above the upper plan.
- 9 - Leave the glue to get dry without warming the integrated kit.
-10 - Make the seal ( food quality).
-11 - Leave the seal to get dry without warming the integrated kit.
18