Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.2
WARRANTY
ENAG waives all liability if the installation rules and instructions for use are not observed.
The warranty is valid for 24 months. It covers parts and labour for equipment returned to the Quimper plant (France).
Only original parts recognized as being defective will be replaced under the warranty.
Our warranty does not cover :
1.
Failure to abide by this manual
2.
Any mechanical, electrical or electronic alterations to the appliance
3.
Improper use
4.
Presence of moisture
5.
Failure to comply with DC power-supply tolerances (i.e. overvoltage)
6.
Incorrect connections
7.
Falls or impacts during transportation, installation or use
8.
Repairs carried out by anyone unauthorized by ENAG
9.
The maintenance made by a non-authorized person by ENAG
10. Connection of any interface not supplied by ENAG
11. The cost of packaging and carriage
12. Apparent or latent damage sustained during shipment and/or handling (any such claims should be sent to the
haulier)
Our warranty on no account provides for any form of compensation. ENAG shall not be held liable for damage incurred
as a result of using the Remote Display.
3
OPERATING-PRESENTATION-INTERFACES
3.1
O
PERATING PRINCIPLE
The Remote Display is designed to offer all available information about the charging process while the charger is
running. It is possible to use an external power supply in order to supervise batteries when AC network is off.
If a battery is employed to power the display externally in order to supervise batteries when AC
network is off:
In case this battery remains uncharged during min. 4 weeks (wintering), please disconnect the
battery in order to avoid discharging due to continuous
3.2
O
VERVIEW PRESENTATION
The full colour touch screen Remote Display is connected via a
3 pole cable to the battery charger. The Display is supplied by
the battery charger through the connection cable.
consumption.
Removed front
cover
21
Publicité
Chapitres
Table des Matières
