Publicité
Les langues disponibles
Les langues disponibles
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer, the screen will go
blank and the 1 (power) indicator will either light up green or
flash orange. If the 1 (power) indicator is lit in orange, the
computer is in power saving mode. Try pressing any key on the
keyboard.
If the 1 (power) indicator is green
1
Disconnect the video input cable, or turn off the
connected computer.
2
Press the 1 (power) button to turn the monitor off
and on.
3
Move the control button , for 2 seconds before the
monitor enters power saving mode.
If all three color bars appear (red, green, blue), the monitor is
working properly. Reconnect the video input cables and check the
condition of your computer.
If the color bars do not appear, there is a potential monitor failure.
Inform your authorized Sony dealer of the monitor's condition.
If the 1 (power) indicator is flashing orange
Press the 1 (power) button to turn the monitor off and
on.
If the 1 (power) indicator lights up green, the monitor is working
properly.
If the 1 (power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between orange
flashes of the 1 (power) indicator and inform your authorized
Sony dealer of the monitor's condition. Be sure to note the model
name and serial number of your monitor. Also note the make and
model of your computer and video board.
16
MENU
1 (power) indicator
M E N U
Specifications
HMD-A100
CRT
0.25 mm aperture grille pitch
15 inches measured diagonally
90-degree deflection
Viewable image size
Approx. 285
(11
14.0" viewing image
Resolution
Horizontal: Max. 1280 dots
Vertical: Max. 1024 lines
Standard image area
Approx. 270
(10
Deflection frequency*
Horizontal: 30 to 70 kHz
Vertical: 48 to 120 Hz
AC input voltage/current 100 to 120 V, 50 – 60 Hz, 1.6 – 0.7 A
Power consumption
Max. 95 W (with no USB devices
connected)
Dimensions
Approx. 373
(14
Mass
Approx. 15 kg (33 lb 11 oz)
Plug and Play
DDC1/DDC2B
Supplied accessories
See page 6
* Recommended horizontal and vertical timing condition
• Horizontal sync width should be more than 1.0 µsec.
• Horizontal blanking width should be more than 3.6 µsec.
• Vertical blanking width should be more than 500 µsec.
HMD-A200
CRT
0.25 mm aperture grille pitch
17 inches measured diagonally
90-degree deflection
Viewable image size
Approx. 327
(12
16.0" viewing image
Resolution
Horizontal: Max. 1280 dots
Vertical: Max. 1024 lines
Standard image area
Approx. 312
(12
Deflection frequency*
Horizontal: 30 to 70 kHz
Vertical: 48 to 120 Hz
AC input voltage/current 100 to 120 V, 50 – 60 Hz, 1.9 – 0.8 A
Power consumption
Max. 115 W (with no USB devices
connected)
Dimensions
Approx. 460
(18
Mass
Approx. 19 kg (41 lb 14 oz)
Plug and Play
DDC1/DDC2B
Supplied accessories
See page 6
* Recommended horizontal and vertical timing condition
• Horizontal sync width should be more than 1.0 µsec.
• Horizontal blanking width should be more than 3.0 µsec.
• Vertical blanking width should be more than 500 µsec.
Design and specifications are subject to change without notice.
215 mm (w/h)
1
1
/
8
/
inches)
4
2
202 mm (w/h)
3
/
8 inches)
4
372
425 mm (w/h/d)
3
3
3
/
14
/
16
/
inches)
4
4
4
243 mm (w/h)
7
5
/
9
/
inches)
8
8
234 mm (w/h)
3
1
/
9
/
inches)
8
4
378
441 mm (w/h/d)
1
3
/
15
17
/
inches)
8
8
Publicité
