BGS technic 1988 Mode D'emploi page 4

OCCUPATIONAL SAFETY
When using this tool,
always wear following protective equipment:

Safety glasses

Anti-slip safety shoes

Work gloves
ATTENTION
The included tools are designed exclusively for manual operation, never use pneumatically or
electrically operated devices.
USE (WHEEL NUT)
Measure the thread pitch with the thread gauge.
Choose the correct die and clamp into the holder.
Holder with die can be rotated by ratchet or sliding bar.
USE (WHEEL STUD)
Measure the thread pitch on the wheel
bolt using the thread gauge.
Choose the correct tap and insert it
into the holder.
Holders with tap can be rotated by
ratchet or sliding bar.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed