Publicité
Required tools/Outils nécessaires :
Gloves
/Gants
Table
/Table
Power drill
/Perceuse électrique
Pencil
/Crayon
04
Tools/Outils
Safety glasses
/Lunettes de sécurité
Ladder
/Échelle
Screw drive
/Tournevis
Tape measure
/Ruban à mesurer
Tips:
1.Clear a working area to allow access on 4 sides. A raised work
surface will make assembly easier. It is easier to install the wall
panel on the table.
2.All parts are identified so when working through the instructions
page by page the diagrams show where each part is positioned.
3.Most pre-punched holes need to be fixed with self-tapping
screws, and a few holes need to use self-drilling screws.
4.Before starting, to avoid any accidental injury, we recommend the
use of gloves to protect your hands, safety glasses to protect your
eyes and shoes or boots to protect your feet.
5.Please keep children away from your construction site.
6.Most assembly can be completed by one person, assistance may
be needed when you reach the erection stage.
7.Please note: Some local government authorities have rules &
regulations on shed installation and you may need approval to
erect this shed.
Steps:
1.Unpack all components from the carton and lay outside your work
area and check parts against the part list.
2.Work through assembly instructions page by page.
3.When assembly completed, place the shed in position and fix
anchor to the ground.
4.Clean up all metal pieces and screws.
EN
05
Publicité
