Publicité
SHED ASSEMBLY JOINING WALL
/ASSEMBLAGE DE L'ABRI MUR DE JONCTION
PART A/PARTIE A
Left wall
/Mur gauche
PART A/PARTIE A
24
PART B/PARTIE B
Right wall
/Mur droit
ANCHORING ASSEMBLY
/ASSEMBLAGE DE L'ANCRAGE
1
500 /19.7"
Unit: inch
/Unité : pouce
L1=L2≈2201mm/86.7"
200/7.9"
EN: 1.The shed is now free standing. It is critical at this stage to
ensure the shed is leveled.
2.Then measure the diagonal distance and make sure the four side
walls are squared to 90 degrees.
3.Use anchor kit (C7 & S11) when fixing to a concrete base. Fasten-
ing the anchor kit onto a concrete pad.
3.1 Mark the place of the anchor on the ground.
3.2 Use 0.39"concrete drill bit and drill holes 2.4" deep.
3.3 Tap concrete fixing bolts into the hole, place anchor, add washer
and nut and fasten.
500 /19.7"
200/7.9"
25
Publicité
