System Build 7559337COM Mode D'emploi page 17

STEP 8
13
Assure that your unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
Carefully turn the cabinet over on it's front side. Align squarely with
(x35)
outer edges. Flush bottom edge of back panel with the bottom edge
of bottom and nail straight into back edges of bottom, left panel,
partition, right panel & top.
M
B
raw surface
E
Flush bottom edge of the back
panel with the bottom edge of
bottom (E).
17
13