EVGA BQ 700W Mode D'emploi page 4

Features
STABLE POWER
The 500BQ / 600BQ / 700BQ has outstanding electrical performance with
power output. This can help you achieve the highest possible overclock (optional) and provide the most stable
and reliable power to all components. The 500BQ / 600BQ / 700BQ also provides
(220VAC~240VAC) efficiency and is
TOP QUALITY PROTECTIONS
The 500BQ / 600BQ / 700BQ comes equipped with the most comprehensive protection set possible, including Over Voltage
Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protection (SCP),
and Over Current Protection (OCP). 500BQ/600BQ is also covered by a 3-year warranty and 700BQ is covered by
a 5- year warranty with EVGA's legendary customer service and support.
MODULAR DESIGN
Reduce clutter in the case,
any system. Modular PSU designs allow the user to disconnect the cable from the power supply side if they
are not needed for the specific configuration. This can help
management as well as airflow throughout the system.
Installation
1. Remove the power supply from its packaging.
2. Use the screws provided with your case to install the power supply into
your computer. NOTE:
the fan facing down. However, if your case places the power supply at the
bottom of the case and there are no ventilation holes available, it may be
best to install the power supply with the fan facing up for greater efficiency
and reliability.
3. Connect the 20+4-Pin ATX cable to the motherboard.
500W / 600W 700W Bronze Power Supply User Manual
80 PLUS ® BRONZE
improve ambient temperatures
It is recommended to install the power supply with
ultra stable voltage
certified.
with better airflow overall and provide a clean look to
free up space inside the case and
3
and extremely clean
up to 85% (115VAC) / 88%
improve cable
English