Publicité
Les langues disponibles
Les langues disponibles
3. When the layers of ice melt, place a few dry rags in the freezer compartment to trap
the water.
4. First remove the large blocks of ice.
5. Next, remove the small pieces of ice.
6. Wipe and dry the appliance and the door gaskets with dry, soft rags.
7. After cleaning, leave the doors open for a while to ventilate the unit.
TROUBLESHOOTING
If you have a problem with your device, or if you think the device is not working
properly, there are a few things you can do
simple checks before calling a technician. Please read it. There are a few
simple checks that you can do in this section before calling a technician.
Warning! Do not attempt to repair the device yourself. If the problem persists after
you have performed the checks listed below, contact a qualified electrician,
authorized service technician, or the store where you purchased the product.
Problem
The device does not
works
not
correctly
Bad
Possible causes and solutions
Check that the power cord is correctly plugged into the
mains.
Check your power module fuse or circuit, replace if
necessary.
The ambient temperature is too low. Try adjusting the room
temperature to solve this problem.
In order to protect the compressor, it is normal that the freezer
does not operate during the automatic defrost cycle or that it
does not turn on immediately after turning on the appliance.
The interior may need to be cleaned.
EN-34
Publicité
