Ryobi ONE+ PBLSV719 Manuel D'utilisation page 5

WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
WARNING:
Do not put hands or objects inside of floor head attach-
ment as this could cause a malfunction of the tool or risk
of injury may occur.
APPLICATIONS
You may use this product for the following purpose:
Light-duty vacuuming of dry surfaces
Household type
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 8.
To install:
Insert the battery pack into the battery port.
ASSEMBLY
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
OPERATION
Make sure the latches on each side of the battery pack
snap into place and that the battery pack is secured in
the tool before beginning operation.
To remove:
Locate the latches on the side of the battery pack and
depress both sides to release the battery pack from the
tool.
For complete charging instructions, see the operator's manu-
als for your battery pack and charger.
NOTE: This unit can be stored on the optional docking sta-
tion mount, PCG719. See operator's manual for installation
and charging instructions.
STARTING/STOPPING THE VACUUM
See Figure 3, page 8.
To start the vacuum:
Press the ON/OFF button.
To stop the vacuum:
Press the ON/OFF button again.
MODE SETTINGS
See Figure 3, page 8.
The vacuum has three modes and roller bar ON/OFF to ac-
commodate your cleaning needs.
NOTE: The vacuum always starts on MEDIUM mode.
Press the PLUS button to increase to HIGH mode, for
carpet and more embedded messes.
Press the MINUS button to decrease to LOW mode, for
hard floors and every day messes.
TURNING OFF THE ROLLER BARS
See Figure 3, page 8
The floor head can be used with the roller bar turned off.
To turn off the roller bar:
Press the roller bar ON/OFF button to turn off the use of
the roller bars.
5 — English