Publicité
To change the functions in the function menu
(Function Menu Set.)
The following is the procedure for changing [Drive Mode] in the function
menu for still images to [Grid Line].
• To change the function menu for movie shooting, select an item that
you want to change from the function menu for movie shooting in
step
.
MENU
Select
(Drive Mode) from among the 12 functions for
still image shooting in the function menu using the top/
bottom/left/right side of the control wheel, and then press
the center.
Press the left/right side of the control wheel until
[Grid Line] is displayed. Select [Grid Line], and then press
the center.
•
(Grid Line) will be displayed in the former location of
(Drive Mode) in the function menu.
How to use the Quick Navi screen
The Quick Navi screen is a function optimized for shooting with the
viewfinder, that lets you control settings directly.
1
Select MENU
[Monitor].
2
Place a
mark on [For viewfinder] and then select [Enter].
3
Press the DISP on the control wheel to set the screen mode to
[For viewfinder].
(Camera Settings 2) [Function Menu Set.].
(Camera Settings 2) [DISP Button]
GB
GB
19
Publicité
