Enerwatt EWC612-1.5X4 Guide De L'utilisateur page 11

IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
SAFETY PRECAUTIONS FOR USING THE CHARGER
1. Do NOT place the charger in the engine compartment or near moving parts or near the battery; place as far away from them as
the DC cable permits. NEVER place a charger directly above a battery being charged; gases or fluids from the battery will corrode
and damage the charger.
2. Do NOT cover the charger while charging.
3. Do NOT expose to rain or wet conditions.
4. Connect and disconnect the DC output only after removing the AC cord from the electric outlet.
5. Using an attachment not recommended or sold by the manufacturer may result in a risk of fire, electric shock or personal injury.
6. Do not overcharge batteries by selecting the wrong charge mode.
7. To reduce the risk of damage to the electrical plug and cord, pull by the plug rather than the cord when disconnecting charger.
8. To reduce the risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning.
9. Operate with caution if the charger has received an impact or been dropped. Have it checked and repaired if damaged.
10. Any repair must be carried out by the manufacturer or an authorized repair agent to ensure safe use.
11. Pursuant to California Proposition 65, this product contains chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm. Wash hands after handling.
ABOUT EWC612-1.5X4
1. The EWC612-1.5X4 is designed for charging all types of 12V lead-acid, 6V lead-acid and 12V lithium-ion batteries, including WET
(Flooded), GEL, MF (Maintenance-Free), EFB (Enhanced Flooded Battery), AGM (Absorbed Glass Mat), and LIB (lithium-ion) batteries.
2. Built-in intelligent microprocessor makes charging faster, easier and safer.
3. This charger's safety features include spark-proof technology and protection for reverse polarity, short-circuit, overcurrent,
overcharging and overheating.
4. The charger has auto-memory, which returns to the last selected mode when restarted (except Standby Mode).
5. When battery level indicator turns to 100% solid Green LED, it will automatically switch from full charge to maintenance status
to maintain batteries during prolonged periods of storage without overcharging or damaging the battery.
6. The EWC612-1.5X4 has four external holes for mounting. Mount the charger in a desired location with self-drill screws.
It is important to account for the distance to the battery.
MODEL: EWC612-1.5X4
USER'S MANUAL
11