Enerwatt EWC-X10 Mode D'emploi

EWC-X10
Vehicle Wireless Charging Bracket
Product features
1. The glass lens emits light, which is
especially high-end technology.
2. Metal frame made of hardware makes
the texture brighter and stronger.
3. Stepping motor, silent, longer service life.
4. Touch the machine at the bottom, breaking
the traditional way and creating new feelings.
5. Built-in Farah capacitor, after power failure
and flameout, any machine can be taken.
6. FOD automatic foreign body detection and
intelligent metal identification.
Specification parameters
Product Name: X10 Car Wireless Charging Bracket
Input: QC3.0 car charger adapter
Output Power: 15W (10W 7.5W 5W is supported)
Applicable to Mobile Phones: 4.7-6.9 inches
Material: ABS+PC+ motor+metal+silicone
Product Dimensions: 11.9 x 7.6 x 5.8 cm
Product Weight: Net weight 138 gramme
Gross Weight: 240 gramme
Instructions
1. Assemble and tighten the ball nuts of products and
accessories (also compatible with other accessories
with a ball head of a diameter of 17 mm), adjust the
angle and fix it in the ideal position.
Instructions
2. Connect the Type-C interface located at the product's
bottom to the standard data cable. Then, activate the car's
power port (cigarette lighter) to supply power. Once this is
done, the blue indicator light on the product's lens will
illuminate, indicating that it is operating correctly.
3. Once you place your phone onto the device, the left and
right wings will instantly secure the phone automatically.
If your phone supports the QI wireless charging protocol,
the product will initiate wireless charging simultaneously.
However, if your mobile phone does not support wireless
charging, the product will securely hold the phone with its
wings, but it will not provide a charging function. It's worth
noting that this product boasts a maximum charging power
of 15 watts, ensuring efficient charging. The charging
performance may vary depending on the charging
environment and the specific model of your mobile phone.
4. To guarantee a consistent and effective charging process,
it's essential to note that this product should not be
obstructed by materials like gold. Additionally, when
charging your mobile phone, avoid using it with an
excessively thick phone case, thicker than 3 mm,
to optimize charging efficiency and stability.
5. To retrieve your mobile phone, simply touch either of the two
touch keys on the base. This action triggers the automatic
release of the product's wings, allowing you to easily remove
your phone. You can also manually remove the phone
by gently pulling it but take care to press the product to
prevent the shelf from dislodging. Furthermore, when
the car is turned off, and the power is disconnected,
you can activate the built-in Farah Capacitor by tapping
the device 1-2 times, causing it to open and close.
Silica gel
Charging induction
Touch
sensing
Type-c input port
Adjusting nut
Clamp arm
Metal frame
Clamping
point
Silica gel
Support point
Screw head
Silicone pad
Regulate point
Silicone pad
Important Considerations
for Product Usage
1. To optimize charging performance, ensure you use
a standard car charger like QC3.0 with this product.
2. To prevent product failure, exercise caution and
avoid excessive pressure or impacts.
3. Avoid exposing the product to high temperatures
and humidity.
4. Please refrain from disassembling or reassembling
the product without proper authorization.
Distribué par | Distributed by: TCED INTL. Inc.
700, chemin du Grand Bernier Nord, Saint-Jean-sur-Richelieu, (Québec) J2W 2H1