Enerwatt EWC12-148 Manuel Du Propriétaire

WARNING
• The charger is designed to charge and maintain 12V conventional lead-acid battery only. (VRLA), AGM, Pure Lead,
Gel and WET, not suitable for Li-ion batteries.
• We always recommend that you check the Battery Manufacturers specifications before using this charger
• Explosive gases may escape from the battery during charging. Provide ventilation to prevent flames and sparks.
• For indoor use. Do not expose charger to rain, snow or liquids.
• For charging lead-acid batteries ONLY (of the size & voltage indicated in the specifications table)
• Battery acid is corrosive. Rinse immediately with water if acid comes into contact with skin or eyes.
• The charger should be used on a flat surface.
• Never charge a frozen battery.
• Never charge a damaged battery.
• Never place the charger on the battery while charging.
• Be extra cautious to reduce risk of dropping a metal tool onto battery.
It might spark or short-circuit battery or other electrical part that may cause explosion.
• When working with a lead-acid battery, remove personal metal items such as rings, bracelets, necklaces, watches...
• NEVER smoke or allow a spark or flame in vicinity of battery or engine.
• Do not charge non-rechargeable batteries.
• In order to reduce risk of electric shock, unplug charger from AC outlet before doing any maintenance or cleaning.
Turn off controls will reduce risk.
• The kit is not supposed to be used by children or by people who are not able to understand the manual,
unless they are supervised by a responsible person who ensures the proper use of the kit.
OWNER'S MANUAL
8 AMP 12 VOLT BATTERY CHARGER
PLUS BATTERY MAINTAINER AND REJUVENATOR
Version française à la page
THIS MANUAL CONTAINS IMPORTANT SAFETY
AND OPERATING INSTRUCTIONS.
READ ENTIRE INSTRUCTION BEFORE USE.
MODEL: EWC12-148
USER'S MANUAL
1