Publicité
Les langues disponibles
Les langues disponibles
Defrosting Your Beverage Cooler
Your Beverage Cooler is designed with a manual defrost system.
The Beverage Cooler surfaces will defrost, when the unit is unplug.
Water from the unit is disposed of automatically, by means of being
channeled onto a drip tray located on the compressor. Heat transfer
from the compressor causes this water to evaporate.
Power Interruptions
• Occasionally there may be power interruptions due to
thunderstorms or other causes. Remove the power cord from AC
outlet when a power outage occurs. When power has been restored,
re-plug power cord to AC outlet.
Vacation and Moving Care
• For long vacations or absences, empty contents from Beverage
Cooler, unplug the unit and clean the Beverage Cooler and door
gaskets according to "General cleaning" section. Prop doors open,
so air can circulate inside. When moving, always move the
Beverage Cooler vertically. Do not move with the unit lying down.
Possible damage to the sealed system could occur.
Troubleshooting
Beverage Cooler Does Not Operate
• Check if Beverage Cooler is plugged in.
• Check if there is power at the ac outlet, by checking the circuit
breaker.
• Check if power pad is on.
09
Publicité
