Publicité
Les langues disponibles
Les langues disponibles
Note: If your Beverage Cooler has been tilted for any reason, wait
24 hours before plugging it in.
Drip Tray
• Ensure the drip tray in the rear of the unit is in the proper
position.
WARNING: ELECTRICAL REQUIREMENT - SHOCK HAZARD
Electrical Requirement
• Make sure there is a suitable power outlet (115 volts, 15 amps
outlet) with proper grounding to power the Beverage Cooler.
• Avoid the use of three prong adapters or cutting off the third
grounding prong in order to accommodate a two prong outlet. This
is a dangerous practice since it provides no effective grounding for
the Beverage Cooler and may result in shock hazard.
Installation Limitations
• Do not install your Beverage Cooler in any location not properly
insulated or heated (e.g., garage etc.). Your Beverage Cooler was
F/13°C.
• Select a suitable location for the Beverage Cooler on a hard even
surface away from direct sunlight or heat source (e.g., radiators,
baseboard heaters, cooking appliances, etc.). Any floor unevenness
should be corrected with the leveling feet located on the front and
rear bottom corners of the Beverage Cooler.
06
Publicité
