Kimex 046 Série Manuel D'utilisation page 9

Assembly instructions
(Fig.12)
（Fig.13)
(Fig.14)
(Fig.15)
7. Take the straight poles and the supporting
legs (back and side) out of the box. Unfold it
and make sure the hinges click into place.
(Fig.15)
Assembly instructions
(Fig. 16)
(Fig. 17)
(Fig. 18)
(Fig. 19)
8. Position the back supporting legs onto the
inner side of the straight pole. Use M8X50
screws to tighten it. The directivity can be
indicated by the L/R label on the straight
poles and the back support legs. (Fig16)
9. Lay the frame on the floor and position the
legs over both sides of the frame.
Use M8X80 screws to tighten the frame and
the back supporting legs. (With straight
poles attached). (Fig.17)
10. Push the frame to up-standing position. [5
to 6 man-power for each side is strongly
recommended (Fig.18)].
11. Attach the side supporting legs to the outer
side of the straight pole and tighten it with
M8X50 screws. (Fig.19)