Safety Notice - Kimex 046 Série Manuel D'utilisation

Assembly instructions
(Fig. 20)
(Fig.21)

Safety Notice

Misuse of the screen may cause
damage to the screen, or injury
to persons.
Warnin
Do not hang things from the
screen or climb on it. Doing so
may cause the screen to fall off
and damage the screen and
Do not climb
cause injury.
on the screen
Note: If the screen is faulty or is damaged in any way. Do not try to repair the projection
screen yourself. Contact customer service to arrange it to be repaired.
The projection screen parts and specifications are subject to change without prior
notice.
12. Assembly is now completed and the
screen will be stable on a flat surface.
(Fig.20)
13. After using the screen, disassemble
and store it in the Aluminum storage
boxes provided. To disassemble the
screen, implement the assemble
procedure in reverse order. (Fig. 21)
The projection screen must be set up on a
stable surface where there is sufficient
space. Failure to do so may cause the
screen to fall over causing damage to the
Notice
screen and injury to persons.
After using the projection screen
Disassemble the screen and store it in
the aluminum storage box provided.
This will protect it from dust, dirt and
accidental damages.
Warning
Notice
Do Not
Do not touch the projection
area with hands
Do not write or draw on
the projection area.
Correct
Use a soft damp cloth or soft brush
to clean the projection area.
After using the screen, disassemble
the screen and store it in the aluminum
storage box provided.
Do not use chemical cleaning
agents or alcohol to clean the
projection area
Do not disassemble
the screen when it is in use.
Use clean water and a soft damp
cloth to clean the screen.