ICU CLOM Cam 5 Mode D'emploi page 21

ENGLISH
Night quality
Number of
images in
each series
Video
resolution
Video length
Sensor
Sensor
ON/OFF
Sensitivity
Operating
time
Trigger
interval
Time lapse
Highest quality: Short shutter speed to minimize motion blur
for better image quality, but reduced IR flash range.
Balanced: Combination of highest quality and maximum
range.
Max. Range: Longer shutter speed to extend IR flash range
for better night vision, but lower image quality.
1 up to 9 photos can be taken for each series. The first image
in each series is sent.
FHD-1920*1080, HD-1280*720, VGA-640*360
5~60 seconds
On: The camera is triggered when movement is detected.
Off: The camera is not triggered when movement is
detected.
Auto / Low / Normal / High
A higher sensitivity means that the sensor is more sensitive
to the movement of smaller objects, has a higher detection
range, and can better detect differences between body heat
and external temperature. This means that the camera
triggers more easily. With the "Auto" setting, the sensor
adjusts automatically to the external temperature.
If no operating time is set (off), the camera always triggers
when in active mode.
If an operating time is set (on), the camera triggers only
within the set time period. To set the operating time, confirm
"On" with "OK" and use the UP/DOWN buttons to change the
settings. Use the LEFT/RIGHT buttons to switch to the next
field and set the desired time period.
Determines the time interval between two triggers (including
sending time) from 1 second to 60 minutes.
Off
21