ICU CLOM Cam 5 Mode D'emploi page 20

20
Video/photo capture and playback mode
In setup mode, press "" to switch between photo and video mode.
Press "" to take a photo or start/stop recording video. In setup mode, press
"OK" to go to playback mode, then press "" or "" to scroll through the
photos/videos. Press "" to watch a video, then press "" to stop playback.
Press "OK" again to exit playback mode.
Deleting videos/photos
Press "MENU" in playback mode to delete individual or all photos. Then press
"MENU" again.
Camera setup
In setup mode, press "MENU" to access the operating menu. In Settings, use "",
"", "" or "" to navigate. Confirm changes with "OK". Press "MENU" to return
to the menu without saving the changes.
USB connection
When the camera is connected to a computer via a USB cable, the memory card
will appear in the computer file menu.
Camera
Name
Mode
Image
resolution
The camera name can be set or changed here. The name is
used for identification purposes and is shown on the photos.
Photo: The camera takes photos based on the set number of
continuous shots and image resolution.
Video: The camera makes a video based on the set video
length and resolution values. The 3rd frame of the video is
transmitted.
Photo & video: When triggered, the camera first takes one or
more photos, then a video based on the set values for the
number of continuous shots and image resolution as well as
video length and resolution.
5MP (2560*1920) (=default),
8MP (3264*2448), 12MP (4000*3000)
ENGLISH