Atlas Copco RRF 31-01 Consignes D'utilisation Et De Sécurité page 14

Les langues disponibles

Technical data

Noise and vibration emission

Noise (in accordance with ISO15744)

Sound pressure level

Sound power level

Uncertainty

Vibration total value, valid from 2010

(3-axes value in accordance with ISO28927-10)

Vibration value

Uncertainty

Noise and Vibration Declaration Statement

These declared values were obtained by laboratory type testing in accordance

with the stated standards and are suitable for comparison with the declared val-

ues of other tools tested in accordance with the same standards. These declared

values are not adequate for use in risk assessments and values measured in indi-

vidual work places may be higher. The actual exposure values and risk of harm

experienced by an individual user are unique and depend upon the way the user

works, the workpiece and the workstation design, as well upon the exposure

time and the physical condition of the user.

We, Atlas Copco Industrial Technique AB, cannot be held liable for the con-

sequences of using the declared values, instead of values reflecting the actual

exposure, in an individual risk assessment in a work place situation over which

we have no control.

This tool may cause hand-arm vibration syndrome if its use is not adequately

managed. An EU guide to managing hand-arm vibration can be found by ac-

cessing

http://www.pneurop.eu/index.php

tion'.

We recommend a programme of health surveillance to detect early symptoms

which may relate to noise or vibration exposure, so that management proce-

dures can be modified to help prevent future impairment.

dBA

105

m/s

1.6

and selecting 'Tools' then 'Legisla-

RRF31-01