Publicité
Les langues disponibles
Les langues disponibles
CLEANING STAINLESS STEEL
Cleaning Exterior surfaces:
Please note, abrasives and scouring agents can scratch range hood
finishes and should not be used to clean finished surfaces.
Stainless Steel finish cleaning instructions:
Clean exterior surfaces with a commercially available stainless steel
cleaner.
CARING FOR FILTERS
CLEANING METAL GREASE FILTERS
The metal grease filters can be cleaned in hot detergent solution or washed
in the dishwasher. They should be cleaned every 2 months use, or more fre-
quently if use is particularly heavy.
1.
Pull out the sliding suction panel.
2. Remove the grease filters by pushing the release tab towards the
side of hood.
3. Wash the filter without bending it, leave it to dry thoroughly before
replacing (if the surface of the filter changes color over time, this
will have absolutely no effect on its efficiency).
4. Replace, taking care to ensure that the handle faces forward.
5. Cleaning in dishwasher may dull the finish of the metal grease filter.
6. Close the sliding suction panel.
7.
Completely dry the filters before installing back into the hood. No
water should be trapped in the filter before reinstalling.
22
Publicité
