Kenwood BLP400BK Instructions page 4

Only use the appliance for its intended
l
domestic use. Kenwood will not accept
any liability if the appliance is subject to
improper use, or failure to comply with
these instructions.
before plugging in
Make sure your electricity supply is
l
the same as the one shown on the
underside of the appliance.
This appliance conforms to EC
l
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
before using for the first
time
Wash the parts: see 'care and
l
cleaning'.
key
blender
a filler cap
b locking lid
c goblet
d blender sealing ring
e blender blade unit
f power unit
g cord storage
h speed + pulse control
i ice crushing button
multi mill (if supplied)
j multi mill jar
k multi mill sealing ring
l multi mill blade unit
grinding mill (if supplied)
m mill lid
n grinding mill blade assembly
grating mill (if supplied)
o mill lid
p grating mill blade assembly
to use your blender
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice.
1 Fit the blender sealing ring d into
the blender blade unit e - ensuring
the seal is located correctly in the
grooved area.
Leaking will occur if the seal
l
is damaged or incorrectly
fitted.
2 Screw the blade assembly onto
the goblet – ensuring the blade
assembly is fully tightened
Refer to the graphics on the
underside of the blade unit as
follows:
- unlocked position
- locked position
3 Put your ingredients into the
goblet.
4 Put the filler cap in the lid.
5 Fit the lid to the goblet and turn
clockwise to lock.
6 Place the blender onto the power
unit with the handle situated to the
right hand side and lock by turning
clockwise until you hear a "click"
.
2
The appliance will not work
l
if the blender is incorrectly
fitted.
7 Select a speed (refer to the
recommended usage chart).
4
.
1