Chapin 61813 Manuel D'utilisation Et D'entretien page 4

INSTALLING THE PUMP HANDLE
The pump handle can be mounted on either side of the pump shaft (A). To
install the pump handle place the handle (C) over the shaft (A) aligning the
pump handle holes and shaft holes. Slide the bolts (B) through the aligned
holes as shown in figure 3. Tighten nuts (D) to bolts. There are holes in the
pump handle to allow for either left (fig.2-4) or right (fig.5) hand mounting.
Nylon Lock Nut
Threaded Bolt
Figure 1
Figure 4
Tighten nut to bolt
INSTALLING THE SHOULDER STRAP
The backpack strap is provided with
multiple features including shoulder
strap, chest strap, waist belt and
lumbar support. (figure 1). The top the
shoulder strap is attached to the top
of the tank and is removable. The hook
from the lumbar support attaches to
the base tube on the bottom of the
tank (figure 2).
Backpack Sprayer Operator's Manual - English
Pump
Handle
Figure 2
Line up holes
Figure 5
Right Hand
Figure 1
Strap Assembly
3E
A. Pump Shaft
Pump
Shaft
Figure 3
Slide bolts through holes
Completed Assembly
Shoulder
Strap
Chest
Strap
Lumbar
Support
Waist
Figure 2
Belt
Hook Attachment
D. Nuts
B. Bolts
C. Pump Handle
Hook
Lumbar
Support
Base
Tube