Waeco AirCon Service Center ASC2300G Notice D'utilisation page 71

AirConServiceCenter
7 Initial start-up
7.1 Setting up and switching on
1. Wheel the AirConServiceCenter to the workplace and lock the front
wheels (9).
I
NOTE
During operation, the device must be on a horizontal, flat surface so that
measurements can be made correctly.
2. Connect the AirConServiceCenter to the mains.
3. To switch it on, set the main switch (21) to I.
The software version number appears in the display (6) for several
seconds:
"SW": Software status
"DB": Database
"SN": Serial number
"LF": Language file
✓ The AirConServiceCenter then runs a software test.
✓ When the start-up procedure is complete, the AirConServiceCenter
displays the following:
– ASC1300G:
– ASC2300G/ASC3300G:
EN
Dometic WAECO
ASC2300G SW
DB
SN 230000 LF
Software test.
Please wait
Refrigerant
11:56:35
Refrigerant
PAG oil
UV tracer
11:56:35
AS230107
lhd11802
R1340062
g. 4820
10/03/15
g. 4820
ml 375
ml 313
10/03/15
Initial start-up
71