Publicité
Les langues disponibles
Les langues disponibles
EN
6
Operation
2
1
Control Switch
Using the switch located on the unit, select one of the following
settings by sliding the switch either left or right.
Auto / On: This setting allows the shredder to be
automatically started by inserting paper into the feed slot.
Always feed the paper in as straight as possible. When the
paper has passed through, the shredder will automatically
stop.
Off: This setting turns off all features of the shredder. For safety
reasons, we recommend that you leave the shredder in the "Off"
position whenever the shredder is unattended or not in use.
Reverse: In the unlikely event of a paper jam, the reverse
setting can be used to help clear the cutters of paper that
did not pass through. Never attempt to clear a jam by using
the reverse function until you have emptied the wastebin.
Forward: The forward setting can also be used to help clear
the cutters in the event of a paper jam. This allows you to
manually activate the shredder to cutting mode.
3
1
24
sheets 20 lb. paper
24
feuilles de papier 20 lb.
Publicité
