Publicité
Les langues disponibles
Les langues disponibles
Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
SE L
M O D E
D SP L
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
SEL
PRESET/
DISC
SOURCE
VOL
The following controls on the rotary commander
require a different operation from the unit.
• SEL (select) button
The same as the select button on the unit.
• PRESET/DISC control
The same as (1)/(2) (ALBM –/+) on the unit
(push in and rotate).
• VOL (volume) control
The same as the volume control dial on the unit
(rotate).
• SEEK/AMS control
The same as (SEEK) –/+ on the unit (rotate, or
rotate and hold).
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
12
D S P L
M O D E
S E L
ATT
MODE
DSPL
SEEK/AMS
OFF
To decrease
1 While pushing the VOL control, press and
hold (SEL).
Publicité
