Declaration Of Conformity - Ingersoll Rand RX-264H Manuel De L'opérateur

DECLARATION OF CONFORMITY

Machine models represented in this manual may be used in various locations world-wide. Machines sold and shipped into
European common market countries requires that the machine display the EC Mark and conform to various directives. In such
cases, the design specification of this machine has been certified as complying with EC directives. Any modification to any part is
absolutely prohibited and would result in the CE certification and marking being rendered invalid. A declaration of that conformity
follows:
We,
Ingersoll Rand Company Ltd
Portable Power Division
Swan Lane
Hindley Green
Wigan WN2 4EZ
United Kingdom
Declare that under our sole responsibility for manufacture and supply, the product(s)
Uprigth Rammers Type RX-264H and RX-344H
To which this declaration relates, is (are) in conformity with the provisions of the above directives using the following
principal standards EN12100, EN500-1 and EN500-4.
Issued at Hindley Green in January 2006
Peter Edgeller,
Technical Manager
Ingersoll Rand Company Limited declare that the following Upright Rammers have beenmanufactured in conformity
with the directive as shown.
Directive Machine Model
2000/14/EC
Annex VI Part 1
amended by
2005/88/EC
Issued at ............................ Hindley Green
st
1 Declaration: January 2006
DECLARATION OF CONFORMITY WITH EC DIRECTIVES
98/37/EC, 2000/14/EC amended by 2005/88/EC, 2002/44/EC
CONFORMITY TO NOISE DIRECTIVE
Weigth Range
RX-264H 55 kg
RX-344H 72 kg
2000/14/EC
Mean Measured
Value
102.99 L
WA
103.41 L
WA
Peter Edgeller,
Technical Manager
iii-EN
Guaranteed Level Notified Body
104 L
SNCH,
WA
Luxembourg
N°0499
104 L
WA
RX-264H/RX-344H Upright Rammer
Operation & Maintenance Manual
EN