Publicité
Les langues disponibles
Les langues disponibles
Operation/settings to be done only by the authorised dealer/specialist.
Dealer
Operation/settings to be done by the authorised dealer/specialist or user.
User
Dealer
System temperature setting
The system controls the temperature for each menu based on the
outdoor ambient temperature.
• To set or change the temperatures, make sure to contact your
nearest authorised dealer.
1 Press and hold
for 5 seconds to enter the
temperature range setting mode.
(The display shows SETTING.)
2 Press
or
to select a menu.
3 Press
to enter the menu.
4 Press
or
to set the desired temperature.
5 Press
to confirm the setting.
• Repeat steps 2 to 5 to set other menus.
User
Checking the temperature range
1 Press and hold
for 5 seconds to enter the temperature range setting mode.
2 Press
or
to select a menu.
• Press
to exit.
Menu
Setting of low outdoor ambient temperature.
Setting of high outdoor ambient temperature.
Setting of water outlet temperature at low outdoor
ambient temperature.
Setting of water outlet temperature at high outdoor
ambient temperature.
During HEAT mode, the water
outlet temperature is adjusted as
is shown the diagram on the right.
It is performed within the preset
temperature range.
Setting of outdoor ambient temperature to turn
OFF heating operation during HEAT mode.
Setting of outdoor ambient temperature to turn ON
the backup heater.
Setting of sanitary water tank temperature.
Default
setting
-5 °C
15 °C
55 °C
35 °C
<Water outlet
temperature>
24 °C
0 °C
52 °C
Display
Temperature setting
Temperature
Display
setting
-15 °C ~ 15 °C
-15 °C ~ 15 °C
HEAT
25 °C ~ 65 °C
25 °C ~ 65 °C
max. water temp.
min. water temp.
<Outdoor ambient temperature>
5 °C ~ 35 °C
HEAT
-15 °C ~ 20 °C
HEATER
40 °C ~ 75 °C
TANK
9
Publicité
