Brizo MultiChoice T75P5 Mode D'emploi page 6

75P Series Installation
2
Diverter Cartridge Installation
A.
1
4
3
FOR DIVERTER CARTRIDGE INSTALLATION:
Apply silicone lube to the o-ring (2) to make the
diverter sleeve (3) easier to install on diverter
cartridge. A light coating of plumbers grease
applied to o-rings (4) may aid in assembly.
Install diverter cartridge (1) assuring that the
locating pin on the bottom of the cartridge aligns
with mating hole in rough-in body.
Slide diverter sleeve (3) over cartridge stem
aligning tabs on the diverter sleeve with slots in
rough-in body (5).
101690 Rev. C
5
2
B.
1
5
For Bonnet Installation
Slide bonnet nut (1) over diverter sleeve (2) and
thread into rough-in body.
Hand tighten securely.
4
2